BITUMINA’s selected drumming facilities are majorly located in the Middle East and manufacture high quality new steel drums using high quality Standardized Steel produced by companies such as ArcelorMittal, TATA Steel and MMK all in conformity to EN DIN standards. In these drumming facilities under the supervision of BITUMINA’s QC Management System and Supervision, Bitumen is packed in corrugated cold rolled steel drums.
Our Bitumen is transported in drums of various dimensions and weight. Having a broad experience in transporting bitumen in drums we can advise clients on the most appropriate and suitable form of delivery customs suited for the complexity of your final destination, considering economies of transport and required quality standards to ensure the products reach their target destinations flawlessly without leakage or spillage. We ensure appropriate and realistic consultations to our clients to ensure timely shipment and delivery of products and services to their site, to ensure that projects are not delayed to avoid idle times and project delay penalties. The Staff at BITUMINA is trained to care about efficiency, transparency and attention to detail, ensuring that each client shipment is treated with utmost priority, no matter to size.
You may contact us at all times for consultation on different drum sizes and dimensions, custom fit for your market, destination and project requirements and we ensure to have the flexibility to deliver exactly what you require.
At the current we supply using drums of:40 Kg Drums 150 Kg Drums155 Kg Drums170 Kg Drums180 Kg Drums200 Kg Drums240 Kg Drum

The Polyethylene Bag is a revolutionary system assisting in the bitumen transport. It provides a cost efficient alternative to Bitumen drums. The Polyethylene bags are capable of holding up to 350 kg of bitumen. Advantages over the steel drums:

• In general the waste which remains in drums accounts for 3-4%, with Polyethylene Bag bags there is no residual waste;
• The packaging does not pollute the environment, as drums are hard to recycle and re-sell, especially for projects where the Bitumen is melted distantly from the port at deep inland locations.
• The system is easy for shipping and storing;
• Bitumen is delivered and melted at a convenient location;
• The cost of labour is reduced;
• Due to more efficient heating (only the bitumen is heated and not the drum), carbon emissions are reduced;
• Due to using and melting bitumen only when needed, the constant energy consumption to keep bitumen heated is avoided, which results again in lower carbon emissions;
• Due to cold shipment of the cargo across the world, saving of more carbon emissions in comparison to bulk shipments, which requires constant heating during ocean voyages

BITUMINA provides complete solutions around the Polyethylene Bags System, from supply to melting and storage tanks. Please contact us for further information and free consultation.

*Polycube™ is a Trademark of Polycube Systems, Austria.

The Polyethylene Bag is a revolutionary system assisting in the bitumen transport. It provides a cost efficient alternative to Bitumen drums. The Polyethylene bags are capable of holding up to 350 kg of bitumen. Advantages over the steel drums:

• In general the waste which remains in drums accounts for 3-4%, with Polyethylene Bag bags there is no residual waste;
• The packaging does not pollute the environment, as drums are hard to recycle and re-sell, especially for projects where the Bitumen is melted distantly from the port at deep inland locations.
• The system is easy for shipping and storing;
• Bitumen is delivered and melted at a convenient location;
• The cost of labour is reduced;
• Due to more efficient heating (only the bitumen is heated and not the drum), carbon emissions are reduced;
• Due to using and melting bitumen only when needed, the constant energy consumption to keep bitumen heated is avoided, which results again in lower carbon emissions;
• Due to cold shipment of the cargo across the world, saving of more carbon emissions in comparison to bulk shipments, which requires constant heating during ocean voyages

BITUMINA provides complete solutions around the Polyethylene Bags System, from supply to melting and storage tanks. Please contact us for further information and free consultation.*Polycube™ is a Trademark of Polycube Systems, Austria.

Our Group supplies Bitumen in 1 ton Bitumenbags™ developed by the POERNER™ GROUP of Austria.The Bitumenbag is filled with bitumen that is exactly cooled down to a temperature slightly higher than the softening point – and lower than the melting point of the plastic liner material of the bag into a special Polyolefin Bag and is let down to harden and become solid for easy handling and cold transportation. The inner bag is placed in a very solid and firmly designed 3ply outer layer of special polymeric bags.These bags are environmental friendly and safe to handle, as it allows transportation and storage of large quantities of bitumen for long periods of time reducing energy costs and avoiding any left overs in drums or un-necessary heating like in bulk vessels.The outer layer is cut open and the inner liner melts with the bitumen during the melting process using our specially designed high tech melting units which have a capacity of 4 tons per hour.The reduction in carbon emissions due to long haulage of heated bitumen is avoided in all types of cold packing, however with the bag, additional benefit is that there are no environmental left overs and bitumen is only melted when and where needed. The bags also save about 8% of energy consumption in comparison to drums melting or Bitutainers.

BITUMINA always provides customers with the most efficient and economical freight & logistics solutions.. Through its extensive network, BITUMINA may assist you in bulk shipments of Bitumen to markets were bulk shipment is available and viable. BITUMINA can assist in CIF deliveries of hot bitumen to your terminal, FOB supplies of bulk Bitumen, assistance in voyage and time chartering of bulk vessels as well as procurement of Bitumen Bulk Vessels. We are able to ensure the Vessels, Vessel Operations as well as Vessel Management solution provided meet our clients as well as their operation ports regulations and requisitions. The quality of the hot Bitumen is monitored throughout the voyage by implementation of a distinctive quality management system by BITUMINA’s Quality Control & Quality Assurance Team. Through BITUMINA’s connections with a variety of bulk vessel and tankage owners & operators, we may offering limited opportunities of supply of bitumen in bulk globally, where maritime security and competiveness of bulk services allows us to operate. Do not hesitate to contact us for bulk operations and consultation.